{"id":127,"date":"2019-05-28T13:03:46","date_gmt":"2019-05-28T13:03:46","guid":{"rendered":"http:\/\/blogs.uakron.edu\/ida\/?page_id=127"},"modified":"2023-01-01T23:33:04","modified_gmt":"2023-01-01T23:33:04","slug":"reports","status":"publish","type":"page","link":"https:\/\/blogs.uakron.edu\/ida\/reports\/","title":{"rendered":"Reports"},"content":{"rendered":"\r\n<ul class=\"wp-block-list\">\r\n<li>Ida, \u201cHarmonic Motors for Electromechanical Brake Actuators,\u201d Final report to Ohio Aerospace Institute, November 2007 (With R.J. Veillette, I. Husain and S. Feliz)<\/li>\r\n<li>N. Ida, \u201cInductive Sensor for Strip Edge Detection and Control: A Feasibility Study, North American Manufacturing, July 2007<\/li>\r\n<li>N. Ida, \u201cResonator and pulse induction sensors for strip and edge detection,\u201d North American Manufacturing, October, 2007<\/li>\r\n<li>N. Ida, \u201cInfrared distance sensing for cutting machinery,\u201d Rayco Stump Corporation, July 2007, November 2007, December 2007, July 2008<\/li>\r\n<li>N. Ida, \u201cCalculation of Fusing Currents in Steel Reinforced Copper Cables,\u201d Erico Corporation, February 2010, March 2010, May 2010, July 2010.<\/li>\r\n<li>N. Ida, \u201cAn optical oil sensor for double carcass hoses,\u201d Veyance Inc., November 2009, December 2009.<\/li>\r\n<li>N. Ida, \u201cController and Keyfob for in-tire valve activation,\u201d November 2006, March 2007, February 2008, October 2008<\/li>\r\n<li>N. Ida, \u201cSAR and MPE Calculation for through the skin induction charging,\u201d Theken Inc., July 2006<\/li>\r\n<li>N. Ida, \u201cElectronic Circuit for Magnetically Operated Swing, \u201cMillenium Development Corporation, March 2007<\/li>\r\n<li>N. Ida, \u201cA study of a direct magnetic drive for a swing,\u201d Millenium Development Corporation, June 2006<\/li>\r\n<li>N. Ida, \u201cDesign of A Remotely Controlled Deadbolt System, TKM, April 2003<\/li>\r\n<li>N. Ida, Design of a Rolling Code Controller for Remote Keyless Entry, TKM, March 2001<\/li>\r\n<li>N. Ida, An improved remote entry system, TKM, Nov. 2003<\/li>\r\n<li>N. Ida, In plant evaluation of electromagnetic (EMC) emissions, January 2001, Report to VanDorn-Demag Corporation, Strongsville, Ohio.<\/li>\r\n<li>N. Ida, Annealed steel shield for permanent magnet MRI May 2001, Report to MedDesign Inc., Solon, Ohio.<\/li>\r\n<li>S. M. Elliott, N. Ida and E. K. White, Optimization of a cavity resonator detection system, Report to Goodyear Tire and Rubber Corporation, Akron, OH., February 2001.<\/li>\r\n<li>N. Ida, In service monitoring of air driven pumps by frequency analysis of their acoustic signature, Final report to Warren-Rupp Inc., Mansfield, OH., Nov, 2001.<\/li>\r\n<li>N. Ida, Design of a Rolling Code Controller for Remote Keyless Entry, Report to TKM Unlimited, Akron, OH. September 2001<\/li>\r\n<li>N. Ida, Measurements of permittivity for polymer samples, Report to Advanced Elastomer Systems, Akron, OH., January 1999<\/li>\r\n<li>N. Ida, Measurement of characteristic impedance and attenuation constant for a 50ft sample tether line, Report to Lockheed-Martin corporation, April, 1999.<\/li>\r\n<li>N. Ida, Analysis of the Fields External to a Long Tether Carrying a Balanced Electrical Load, Report to Lockheed-Martin corporation, May 1998.<\/li>\r\n<li>G. Adamovsky and N. Ida, &#8220;Laserbeam propagation through inhomogeneous media with shock-like profiles:modeling and computng,&#8221; National Qeronautics and Space Administration,Lewis Research Center, 1997. NAS 1.15:11352<\/li>\r\n<li>N. Ida, \u201cStone Resistivity Measurements,\u201dReport to Ohio Edison, February 15, 1996<\/li>\r\n<li>N. Ida, \u201cElectromagnetic Error Estimates and Mesh Refinement,\u201d final reoport for ANSYS Inc., Nov.1995<\/li>\r\n<li>N. Ida, &#8220;Evaluation of Upwinding and the Elimination Methods for 3D Velocity Effects,&#8221; final report to MacNeal Scwindler Corporation, May 1995<\/li>\r\n<li>N. Ida, &#8220;Inductance Calculations&#8221;, a short report to Garner Industries, Lincoln Nebraska on calculation ofinductance of high power, spiral coils for bulk erasure of magnetic media,October 5, 1994<\/li>\r\n<li>N. Ida, &#8220;Simulation and Designof a Magnetizer for Data Recording on Tire Beads&#8221;, The Firestone-Bridgestone Corporation, January 4 1991<\/li>\r\n<li>N. Ida, &#8220;Field Profiles for Recording on Tire Beads&#8221;, The Firestone-Bridgestone Corporation, April 25 1989<\/li>\r\n<li>N. Ida, &#8220;Shielding of Magnetizing Elements for Tire Bead Recording&#8221;, The Firestone-Bridgestone Corporation, January 1990<\/li>\r\n<li>N. Ida, &#8220;Multiple Magnetizersand Their Interaction&#8221;, The Firestone-Bridgestone Corporation, June 4 1989<\/li>\r\n<li>N. Ida, &#8220;Detection of ReflectorSurface from Near-Field Phase Measurements&#8221;, Nasa Lewis Research Center,February1991, also NASA report CR-187948 (NAS 1.26:187948)<\/li>\r\n<li>T.Y.P. Chang, N. Ida, A.F. Saleeb, H.Q.Tan and P.S.Wang, &#8220;Advanced Computation Techniques in Finite ElementAnalysis for Engineering Applications&#8221;, Final Report to the National ScienceFoundation, August 17, 1992<\/li>\r\n<li>T.Y.P. Chang, N. Ida, A.F. Saleeb, H.Q.Tan and P.S.Wang, &#8220;Advanced Computation Techniques in Finite ElementAnalysis for Engineering Applications&#8221;, Report to the National ScienceFoundation,March 27, 1990<\/li>\r\n<li>T.Y.P. Chang, N. Ida, A.F. Saleeb, H.Q.Tan and P.S.Wang, &#8220;Advanced Computation Techniques in Finite ElementAnalysis for Engineering Applications&#8221;, Report to the National ScienceFoundation,February 1, 1989<\/li>\r\n<li>N. Ida, &#8220;Finite Element Computation for Electromagnetic Nondestructive Testing Applications&#8221; A series of over 20 reports, prepared during 1987 through 1989 for the American ResearchCorporation of Virginia, Radford, VA<\/li>\r\n<li>N. Ida, &#8220;Simulation of Shielding Grids for Computer Room Floors: Calculation of Inductances, impedancesand Frequency Response&#8221; a report prepared for ERICO Products Corporation,Solon, Ohio, 1990<\/li>\r\n<li>N. Ida, &#8220;Lightning ProtectionGrids: Calculation of Response, Frequency Spectrum Analysis and Filtering&#8221;a report prepared for ERICO Products Corporation, Solon, Ohio, 1990<\/li>\r\n<li>N. Ida, &#8220;Analysis of Materialsin Microwave Cavities&#8221;, a series of 5 reports, prepared during 1989 through1990 for the American Research Corporation of Virginia, Radford, VA<\/li>\r\n<li>N. Ida and L. E. Roemer, &#8220;Feasibility Test of an Actuator Design Using Recently Developed Magnetic MaterialstoMeet NIH Pump Requirements&#8221;, Report to Ohio&#8217;s Thomas Edison Program,February1988<\/li>\r\n<li>N. Ida, &#8220;Design of a MagneticDrive for the Koroly Artificial Heart&#8221;, a Report prepared for Applied Biotechnologies Inc., Akron, Ohio, June 1986<\/li>\r\n<li>N. Ida, &#8220;Computer Modeling andProcessing of NDT Data&#8221;, a Report to the United Nations Industrial DevelopmentOrganization (UNIDO), January 22, 1988<\/li>\r\n<li>N. Ida, &#8220;A TRASYS Model for the15 Meter Hoop-Column Deployable Antenna,&#8221; Report Prepared for NASA LewisResearch Center, Space Communications Branch, July 1987<\/li>\r\n<li>N. Ida, &#8220;A Three-DimensionalMesh Generator,&#8221; a report and user manual, prepared for the ElectricalPower Research Institute, Palo Alto, California, December 1983<\/li>\r\n<li>N. Ida. &#8220;A Three-DimensionalFinite Element Code for Eddy Current NDT Applications,&#8221; Report and UserManual, prepared for the Electrical Power Research Institute, Palo Alto,California, January 1984<\/li>\r\n<li>N. Ida, &#8220;A Two-Dimensional MeshGenerator for Axisymmetric Stress Analysis,&#8221; a report and user manual preparedfor Teledyne Water Pik Corporation, Fort Collins, Colorado, October 1984<\/li>\r\n<li>N. Ida, &#8220;A Computer Code for Axisymmetric Stress Analysis,&#8221; a report and user manual, prepared for TeledyneWater Pik Corporation, Fort Collins, Colorado, October 1984<\/li>\r\n<li>N. Ida, &#8220;A Vectorized Computer Code for Eddy Current NDT Applications,&#8221; a report and user manual for useon the CYBER 205 Vector Computer, prepared for the Electric Power ResearchInstitute, Palo Alto, California, July 1985<\/li>\r\n<li>N. Ida, &#8220;Numerical Calculationsfor Permanent Magnet NMR Assemblies&#8221;, a report prepared for NUMAR Corporation, Philadelphia, PA, October 1985<\/li>\r\n<li>N. Ida, &#8220;3-D Finite Element Eddy Current Code Benchmark Tests,&#8221; a report prepared for the Electric PowerResearch Institute, Palo Alto, California, August 1986<\/li>\r\n<li>N. Ida, &#8220;Three Dimensional Finite Element Modeling of Electromagnetic Nondestructive Testing Phenomena&#8221;,Ph.D. Dissertation, Spring 1983<\/li>\r\n<li>N. Ida, &#8220;Optimization of Solar Cell Power Systems&#8221; M.Sc. Thesis, Ben Gurion University of the Negev, August1979<\/li>\r\n<li>N. Ida, &#8220;Design of a Digitally Controlled AC\/DC power Source&#8221; B.Sc. Project, Ben Gurion University of the Negev, August 1977<\/li>\r\n<\/ul>\r\n","protected":false},"excerpt":{"rendered":"<p>Ida, \u201cHarmonic Motors for Electromechanical Brake Actuators,\u201d Final report to Ohio Aerospace Institute, November 2007 (With R.J. Veillette, I. Husain and S. Feliz) N. Ida, \u201cInductive Sensor for Strip Edge Detection and Control: A Feasibility Study, North American Manufacturing, July 2007 N. Ida, \u201cResonator and pulse induction sensors for strip and edge detection,\u201d North American &hellip; <a href=\"https:\/\/blogs.uakron.edu\/ida\/reports\/\" class=\"more-link\">Continue reading <span class=\"screen-reader-text\">Reports<\/span> <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":23,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-127","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/pages\/127","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/users\/23"}],"replies":[{"embeddable":true,"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/comments?post=127"}],"version-history":[{"count":4,"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/pages\/127\/revisions"}],"predecessor-version":[{"id":3441,"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/pages\/127\/revisions\/3441"}],"wp:attachment":[{"href":"https:\/\/blogs.uakron.edu\/ida\/wp-json\/wp\/v2\/media?parent=127"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}