- Fives-North America, Development of a pulse-induction magnetic sensor for edge detection of metal strips. (2014 – 2016).
- Custer Products, Development of a long-range wireless tow bar based on wifi transceivers (2013 – 2014).
- ERICO Products Inc., Solon, Ohio, Design and simulation of steel reinforced cables, calculation of fusing currents, 2009-2010.
- Q-Tire Corporation, Wireless programmer for in-tire installed microcontrollers, 2007-2008.
- North American Manufacturing, An induction sensor for moving strip edge detection, 2007.
- North American Manufacturing, Resonant magnetic sensor for moving strip edge detection, 2007.
- Rayco Manufacturing, An infrared distance sensor for personnel safety around cutting machinery, (2006-2008).
- Rayco Manufacturing, An induction presence sensing system for prevention of injury in chipper chutes, (2006-2007).
- Millenium Corporation, A magnetically driven, micrprocessor controlled swing for infants, 2006.
- Q-Tire Corporation, Wireless, remotely controlled 3-way air valve for automatically retractable studs in studded tires, 2006-2007.
- The Goodyear Rubber and Tire Corporation, Embedded antennas and sensors, including RFIDs for tire performance monitoring, (2005-2006)
- Lifeware Technologies Inc. “Thermoelectric generators for cookware” and “low voltage electric display circuit and current generator for cookware” (2005-2007)
- First Energy, Akron, Ohio. Measurement and evaluation of conductivity of gravel ground cover for substations (2004)
- TKM Unlimited Inc. Secure Keyless, Wireless Multiple Doors Entry System for Industrial and Retail Locations. (2004-2005). Secure entry system for multiple point access and multiple functions. Includes transmitters, receivers, remote control, software decoders and encoders, production of prototypes
- The Goodyear Rubber and Tire Corporation. A Resonant Microwave Sensor System for Moisture Control in Tire Cord Production. (1999-2005). Design and simulation, and evaluation of final product
- TKM Unlimited Inc. Remote Control / Secure Keyless, Wireless Door Entry System for the Handicaped. (1999-2004). Secure, rolling code based entry system with multiple access methods (keypad, switches, etc.) and multiple functions (door locks, lights, etc). Includes transmitters and receivers (433.9 MHz) as well as software encoders and decoders
- Med-Design, Solon, Ohio, Design of a magnetic shield for an open MRI magnet (2001). Design of partial, passive steel shields for open MRI equipment for specified spatial field distribution
- Vandorn-Demag, Strongsville, Ohio, In plant evaluation of electromagnetic (EMC) emissions, (2001). Measurement and analysis of field distribution for workers’ safety purposes
- Thin Film Consulting, Inc. Design and optimization of an open resonant cavity array for moisture monitoring of rubber products, (2000-2001)
- CAES. A compressed air power generating model, (1999-2000). A model for mine based compressed air systems that includes the compression and generation cycles
- Lockheed-Martin Corp. Tether antenna for low frequency broadcast. (1999-2000). Design and evaluation of a tether for blimps that can serve as a low frequency antenna
- The Goodyear Rubber and Tire Corporation. Pressure measurements and wireless transmission in EMT tires (1998 – 1999). Analysis, design and proptotyping of a complete telemetry system including transmitters, receivers, encoders, decoders and display for pressure and temperature in tires
- Advanced Elastomer Co. Permittivity and loss tangent measurements for polymers (1998-1999). Microwave range measurement of properties of polymers for antenna applications
- Lockheed-Martin Corp. Tethered power cable design for anchored blimp platforms (1997-1999). Calculation and specification of a tether power cable for blimps
- Custer Products Inc. Wireless controlled signalling for cars and trailers(1998-1999). Design, testing and prototyping, including transmitters, receivers, encoders and decoders needed to implement a complete system
- Ansys Inc. Adaptive mesh generation and solution for electromagnetic field problems (1995). Evaluation and recommendations for implementation in software
- MacNeal Schwindler Corporation. Finite element methods for velocity effects modeling in electromagnetic software (1995). Theoretical analysis and recommendations for implementation of motion effects on magnetic fields in software.
- Preferred Rubber Corporation, Barberton, Ohio. Evaluation and examination of electronics technicians (1995)
- Ohio Edison, Akron, Ohio. Measurement and evaluation of conductivity of gravel ground cover for substations (1995-1996).
- Garner Industries, Lincoln, Nebraska Design of inductance coils for bulk erasure of magnetic media (1994).
- Loral Defense Systems-Akron, Magnetic sensors and propagation in sea water (1993-1994). FDTD models for low frequency electromagnetic wave propagation in sea water.
- Jetstream Power International, Holmsville, Ohio. Design of low speed, high power permanent magnets generators for use with wind driven turbines. Also magnetic couplers for no-contact drives of pistons in corrosive-fluid pumps
- Med-Design, Solon, Ohio, design of magnetic shields for NMR installations (1993-2002). Design of partial, passive shields for specified spatial field distribution outside NMR rooms.
- Firestone-Bridgestone Corporation, Akron, Ohio. Magnetic design and innovative magnetic recording systems (1989-1991). Methods of magnetic recording of data on tire beads.
- SIA America. Electrostatic deposition of materials for sand paper production (1989-1990). Calculation and modifications for uniform deposition, issues of high voltage and spark gap protectors.
- ERICO Products Inc., Solon, Ohio. Design and measurements of cable products, ground planes for computer rooms and electromagnetic shielding (1989-1992) for minimum impedance. Response of grids to overstress voltages.
- American Research Corporation of Virginia, Radford, Virginia. Computation of electromagnetic fields for nondestructive testing applications and design of eddy current sensors (1987-1991)
- Applied Biotechnologies Inc., Akron, Ohio. Design of electromagnetic drives for the Koroly artificial heart (1986). Emphasis was on designs for totally implantable artificial hearts with low power consumption and minimum moving parts
- Technicare Corporation, Solon, Ohio. Shielding of NMR equipment (1985-1986). Assessment of electromagnetic field strength due to commercial NMR equipment in Hospitals and mobile equipment and design of shields to minimize interference with computers and measurement equipment as well as to minimize the risk to humans due to exposure to high intensity electromagnetic fields
- NUMAR Corporation, Philadelphia, Pensylvania. Innovative magnet design for NMR applications (1985-1986). In particular, permanent magnet design and high frequency coil design as these relate to oil field bore-hole NMR equipment
- Teledyne Water Pik Corporation, Fort Collins, Colorado, (1984-1985). Design of plastic pressure vessels for water filters and development of appropriate computer programs for CAD/CAM.