Conference Proceedings

 

  • Keynote address: NDE 4.0: Testing and Evaluation in the Digital Ecosystem, DAS-2022 – International Conference on Development and Application Systems, Suceava, Romania, May 26-28, 2022
  • X.L. Travassos, S. L. Avila, R. L. Adriano and N. Ida, “GPR Antenna Design Framework Validation,” Proceedings of the Compumag conference, Paris, Fr., July 15-19, 2019. (Paper 138)
  • A. Diego; X. L. Travassos, T. Possamai and N. Ida, “Modelling Electro-thermal Effects of Lightning Strike on Anisotropic Composites,” Proceedings of the Compumag conference, Paris, Fr., July 15-19, 2019. (Paper 130)
  • N. Berrabah, N. Ida and H. Subramania, “Implementation of High Order on Surface Radiation Boundary Conditions,” Proceedings of the Compumag conference, Paris, Fr., July 15-19, 2019. (Paper 460)
  • N. Ida, Invited talk “Microwave and Milimeter Wave Nondestructive Testing and Sensors,”The Proceedings of the International Conference on Sensing and Imaging (ICSI 2018)– Liuzhou, China, October 15-17, 2018.
  • N. Ida, “A differential Resonant Edge Detection Sensor,”The Proceedings of the International Conference on Sensing and Imaging (ICSI 2018)– Liuzhou, China, October 15-17, 2018.
  • L. Di Rienzo and N. Ida, “2D Integral Formulation with High Order Impedance Boundary Conditions for Transmission Lines,” ACES 2019 Conference, Miami Florida, April 14-19 2019.
  • N. Ida, Plenary Lecture, “Models for AC induced corrosion – a new challenge in computational electromagnetics” ACES Conference, Florence, March 2017.
  • N. Ida, Keynote Speaker/Distinguished Lecture, “AC Induced Corrosion – Issues of Modeling and Simulation,” IEEE Frontiers in Magnetics III – Workshop on Recent Advances in Magnetism and Spintronics, University of Perugia, March 23, 2017, Sponsored by the IEEE Italy Section.
  • N. Ida, (invited paper) “Instrumentation of Transmission Line Towers for Real-Time Conditions Monitoring,” The Proceedings of the International Conference on Sensing and Imaging (ICSI 2017)– Chengdu, University of Information Technology, Chengdu, Sichuan, China, on June 5-7, 2017.
  • R. Shakya and N. Ida, “Design of a Flame Temperature Sensor using Silicon Nitride Hot Surface Igniter,” The Proceedings of the International Conference on Sensing and Imaging (ICSI 2017)– Chengdu, University of Information Technology, Chengdu, Sichuan, China, on June 5-7, 2017.
  • S. Zhang and N. Ida, “Analytical Calculation and Comparison of the Induced Voltages of Uniform Eddy Current Probes above a Moving Conductor,” The Proceedings of the International Conference on Sensing and Imaging (ICSI 2017)– Chengdu, University of Information Technology, Chengdu, Sichuan, China, on June 5-7, 2017.
  • Mohammadreza Asgari, Kye-shin Lee and Nathan Ida, “Highly Linear Bridge-based ISFET pH Sensor Readout Circuit, Presented at the Midwest Symposium, Boston, MA, August 6-10, 2017, IEEE Xplore, October 2017, DOI: 10.1109/MWSCAS.2017.8053107: (Asgari-ida.pdf)
  • Taohid Latif and Nathan Ida, “A current and vibration based detection system for lightning strikes on transmission towers,” Presented at the Midwest Symposium, Boston, MA, August 6-10, 2017, IEE Xplore, October 2017, DOI: 10.1109/MWSCAS.2017.8053162:
  • O. Al Khateeb and N. Ida, “Uncertainty analysis on band-stop filter using data-driven arbitrary polynomial chaos,” ACES conference, Florence, Italy, March 27 – 30, 2017. DOI: 10.23919/ROPACES.2017.7916271
  • C. de Falco, L. Di Rienzo, N. Ida and S. Yuferev, “Nonlinear impedance boundary condition based on a perturbation approach,” IEEE CEFC Conference 2016, Miami, Fl., Nov. 13-16, 2016, IEEE Explore, January 2017, DOI: 10.1109/CEFC.2016.7815934
  • F. Ahmadi and N. Ida, ”Ultra thin wide bandwidth Metasurface Absorber using Randomly Distributed Scatterers,” Proceedings of the SPIE Conference, 26 February – 2 March 2017, San Jose, Ca., DOI: http://dx.doi.org/10.1117/12.2254493 (SPIE-P2-2017)
  • F. Ahmadi and N. Ida, ”A broadband ultrathin Metasurface Absorber using tilted parallel strips,” Proceedings of the SPIE Conference, 26 February – 2 March 2017, San Jose, Ca., DOI: 10.1117/12.2254 (SPIE-P1-2017)
  • Carlo De Falco,Luca Di Rienzo, Nathan Ida and Sergey Yuferev, “High order Nonlinear Impedance Boundary Condition for a Time-domain Two-dimensional BEM Formulation,” Proceedings of the 7th International Conference on Electromagnetic Field Problems and Applications, Sept. 18-20, 2016, Xi’an, China.
  • N. Ida, Keynote Address, “Design and evaluation of passive MRI shields”, 13th  International Conference on Development and Application Systems,  Suceava, Romania, May 19 – 21, 2016.
  • S. Zhang, N. Ida and W. Wu, “Thickness measurement of metal coating above moving conductive plate by rectangular coil and electromagnetic method,” Proceedings of the 12th IEEE International Conference on Electronic Measurements and Instruments, pp. 1420 – 1425, 2015 (978-1-4799-1/15). (ICEMI2015.pdf )
  • H.B. Lee, J.K. Byun, D.H. Kim and N. Ida, “Comparison of optimal shape design by continuum approach in constant flux and constant current problems,” Proceedings of the CEM-2014, London, March 31-April 1, 2014, in 9th IET International Conference on Computation of Electromagnetics (CEM 2014). DOI: 10:1049/cp.2014.0229.
  • H.B. Lee and N. Ida, “Interpretation of adjoint sensitivity analysis for shape optimal design of electromagnetic systems,” in 9th IET International Conference on Computation of Electromagnetics (CEM 2014). DOI: 10.1049/cp.2014.0181.
  • N. Ida, Keynote Address, “Eddy current nondestructive evaluation – the challenge of accurate modeling,” DAS 2014, May 15 – 17, 2014. IEEE Conference Record 33969. 978-1-4799-5094-2/14. (DAS-2014.pdf )
  • N. Ida, “Sensing and Actuation, A New Paradigm in Teaching,”) Keynote Address), Proceedings of the 8tn International Symposium on Advanced Topics in Electrical Engineering, Bucharest, May 23-25, 2013, IEEE – 978-1-4673-5980-1.
  • Divya Murali and Nathan Ida, “An Ultra-Low Power Sensing Node for Use with Harvested Power,” Proceedings of the ACES-2013 Conference, Monterey, CA., March 23-28, 2013, pp. 934-939.
  • Grigory Adamovski and Nathan Ida, “A Phase Object Approach to Wave Propagation Through Nonhomogeneous Dielectrics with Shock-Like Profiles,” Proceedings of the ACES-2013 Conference, Monterey, CA., March 23-28, 2013, pp. 753-758. 
  • D. Murali and N. Ida, Design of a wireless sensing node for use with harvested power, Proceedings of the Advanced Electromagnetics Systems (AES) conference, May 16-19, Paris, France. Paper: AES-paper-ida-2.pdf
  • N. Ida, “Design and control of a magnetic pendulum actuator,” Proceedings of the OPTIM-2012 Conference, May 24 – 26, 2012, Moeiciu, Romania, pp. 439-443 (IEEE Xplore)
  • N. Ida, I. Husain and R.J. Veillette, “Forces and torque in a magnetically actuated harmonic motor,” Proceedings of the OPTIM-2012 Conference, May 24 – 26, 2012, Moeiciu, Romania, pp. 388-392 (IEEE Xplore)
  • N. Ida, L. Di Rienzo and S. Yuferev, “Surface Impedance Boundary Conditions – Applications to Computer Aided Electromagnetic Design,” Proceedings of the DAS-2012 Conference, Suceava, Romania, May 17-19, 2012, Paper: Ida_paper_DAS_2012.pdf
  • O. J. Varonis and N. Ida, “Eddy current sensing of torque in rotating shafts,” Proceedings of the SIELA 2012 Conference, Burgas, Bulgaria, May 28 30, 2012, Paper: Ida-Varonis.pdf.
  • N. Ida, “Analytic approach to characterization of velocity effects in eddy-current nondestructive testing,” Proceedings of the 10th International Conference of Applied Electromagnetics, September 25-29, 2011, Nis, Serbia (full paper – CDROM – O2-1_Ida_N_full.pdf, also 2 page short paper, pp 59-60. (O2-1_Ida_N_full.pdf)
  • L. Di Rienzo, S. Yuferev and N. Ida, (Invited paper) “Applications of high order surface impedance boundary conditions,” Proceedings of the International PhD Seminar on Computational Electromagnetics and Optimization in Electrical Engineering – CEMOEE 2010, 10-13 September 2010, Sofia, Bulgaria.
  • O. Moreau, V. Costan, J.-M. Devinck, and N. Ida, “Finite Element Modeling of Support Plate Clogging-up in Nuclear Plant Steam Generator,” Proceedings of the 8th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components, 29 September to 1 October 2010, Berlin, Germany (PDF only).
  • X. L. Travassos, M. M. B. Lima, D. A. G. Vieira, A. C. Lisboa and N. Ida, (invited paper), Antenna Optimization Using Multi-Objective Algorithms, in convened session “Antennas today and tomorrow,” European Conference on Antennas and Propagation, 12-16 April, 2010, Barcelona Spain, Paper PID1131907.pdf (PID1131907.pdf)
  • N. Ida, (Invited paper) “The surface impedance boundary condition concept and its role in computational electromagnetics,” Proceedings of the CEMBF 2009 (4th International PhD Seminar on Computational Electromagnetics and Bioeffects of Electromagnetic Fields), August 28-30, 2009, Nis, Serbia, pp. 10-16. (Phd_seminar_paper_ida)
  • N. Ida, (Invited paper) “The application of computational electromagnetics to microwave dielectric gauging,” Proceedings of the 9th International Conference on Applied Electromagnetics, PEC 2009, Nis, Serbia, August 31 – September 2, 2009, pp. 24-30.
  • N. Ida, “Open stripline resonator sensors for rubber properties gauging,” (Invited paper), Proceedings of MOMAG-08, Florianopolis, Brazil, Sept. 7-10, 2008, pp. 1077-1083.
  • N. Ida, “An electromagnetic compatibility course for computer engineers,” Proceedings of the EMC Symposium, Detroit 2008, August 22-25, 2008. (IEEE-EMC-COURSE.PDF)
  • D. Murali and N. Ida, “A Sampling Method for Reduction of Power in Battery Operated Receivers,” Proceedings of the 11th International Conference on Optimization of Electrical and Electronic Equipment, Brasov, Romania, May 22-24, 2008, Vol. 4, pp. 47-50. (optim2008-1.pdf)
  • N. Ida and O. Bhuyia, “Design and Optimization of an Open Stripline Resonator for Rubber Thickness Gauging,” Proceedings of the 11th International Conference on Optimization of Electrical and Electronic Equipment, Brasov, Romania, May 22-24, 2008, Vol. 4, pp. 97-100. (optim2008-2.pdf )
  • S. Clénet, N. Ida, R. Gaignaire et O. Moreau, ”Polynômes doublement orthogonaux pour la résolution de problème en électromagnétisme stochastique”, Proceedings of the NUMELEC 2008 conference, Dec. 6-8, 2008, Lille, France.
  • S. Filiz,  R. Veillette,  I. Husain,  N. Ida, H. Klode, and T. Baudendistel, “Analysis of a Flexible Cylindrical Structure for a Harmonic Motor Drive ,” in the Conference Record of the 2007 Industry Applications Conference, 23-27 Sept. 2007, pp. 510-517. (IAS-2007.pdf )
  • N. Farahat and N. Ida, “Open Stripline Resonator for Gauging in Industrial Applications,” in Review of Progress in Applied Computational Electromagnetics, (ACES Conference, Verona, Italy, April 20-24, 2007), pp. 1846-1851.
  • Razvan Ciocan  and Nathan Ida, “A Transmission Line Matrix Model for Shielding Effects in Stents,” Proceedings of  the EHE’06 Conference, Funchal, Madeira (Portugal), April 27-29, 2006, pp. 1.129-1.134.
  • N. Ida and R. Ciocan, “Use of Transmission Line Methods to Antenna Analysis and Wave Propagation,” in  PIERS-2004 Progress in Electromagnetics Research Symposium, Pissa, Italy, March 28-31, 2004, pp. 461-464 (02A_13_PISA_ANTENNA.PDF)
  • N. Ida and R. Ciocan, “Development of Time-Domain Models for NonDestructive Testing,” in  PIERS-2004 Progress in Electromagnetics Research Symposium, Pissa, Italy, March 28-31, 2004, pp. 671-674. (66_06_PISA_NDT.PDF)
  • R. Ciocan, N. Ida and E. Ciocan, “Three Dimensional Transmission Line Matrix Model for Ultrasonic Imaging,” Proceedings of the SPIE – The International society for optical engineering, Vol. 5047, Smart Nondestructive Evaluation and Health Monitoring of Structural and Biological Systems II, Tribikram Kundu, ed., 2003, pp. 180-190.
  • R. Ciocan and N. Ida, “Application of Transmission Line Matrix Method to Antenna Synthesis,” Proceedings of the 2003 IEEE AP-S International Symposium on Antennas and Propagation and USNC/CNC/URSI North American Radio Science Meeting, Columbus, Ohio, USA, June 22-27, 2003, Vol. III, pp. 768-771 (189.pdf)
  • R. Ciocan and N. Ida, “Applications of Transmission Line Matrix Method For NDT,” in NDT.net (ISSN: 1435-4934) – Vol. 8, No. 4, April 2003, http://www.ndt.net/article/ecndt02/319/319.htm (Paper presented at the 8th ECNDT, Barcelona, June 2002)
  • N. Ida and R. Ciocan, “Applications of Acoustic Spectral Analysis Techniques for in-Service Detection of Pump Diaphragm Failure,” in NDT.net (ISSN: 1435-4934) – Vol. 8, No. 4, April 2003, http://www.ndt.net/article/ecndt02/320/320.htm (Paper presented at the 8th ECNDT, Barcelona, June 2002)
  • S. Barmada, L. Di Rienzo, N. Ida and S. Yuferev, “The use of surface impedance boundary conditions in time domain problems: Numerical and experimental validation,” Proceedings of the 19th Annual Review of Progress in Applied Computational Electromagnetics, (ACES 2003), pp. 397-402. (186.pdf)
  • R. Ciocan and N. Ida, “Transmission line matrix model for microwave scanning microscopy,” Proceedings of the 19th Annual Review of Progress in Applied Computational Electromagnetics, (ACES 2003), pp. 802-808. (185.pdf)
  • N. Ida and R. Ciocan, “Some applications of the TLM methods to nondestrcutive testing,” (invited paper) in the 2002 proceedings of the CBMag Conference, Gramado, Brazil, Oct. 4-7, 2002, paper No. 3 (published on CDRom, 9 pages). (180.pdf)
  •  R. Ciocan, N. Ida and D. Discoll, “A Transmission Line Matrix Model for Ultrasound Imaging,” Proc. SPIE Vol. 4702 , Smart Nondestructive Evaluation for Health Monitoring of Structural and Biological Systems,  pp. 202-211, 2002. (Conference, San Diego, March 17-21, 2002). (179.pdf)
  • N. Ida and R. Ciocan  “Method and system for Air-driven pump monitoring based on frequency analysis of the acoustic signal,” Proc. SPIE Vol. 4694 , Smart Sensor Technology and Measurement Systems , pp. 86-93, 2002
  • R. Ciocan and N. Ida, “A transmission line matrix model for microwave NDT ,” ASNT Spring Conference and 11th Annual Research Symposium ,” Portland Oregon March 2002, pp 86. (177.pdf)
  • N. Ida and E.J. Silva, “Parameter selection for anisotropic PML with ABC in the finite element method,” in the Proceedings of 8th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM-2002), Brasov, Romania, May 16-17, 2002, pp. 13-16.
  • N. Ida and S. Yuferev, “Surface Impedance Boundary Conditions for Low Field Penetration Applications,” in Procedings of the 6th International Conference on Engineering of Modern Electric Systems (SMES), Oradea, Romania, May 2001, pp. 110-117. (151.pdf)
  • S. Barmada, N. Ida and M. Raugi, “Solution of Electromagnetic Transients by Wavelet Expansion in the Time Domain,” Proceedingsof the2001 IEEE Antennas and Propagation Society International Symposium, Boston,MA, July 9-13,  2001, pp. 825-829.
  • E. J. Silva and N. Ida, “On the use of PML and ABC to Truncate Unbounded Domains in the Finite Element Method,” in Proceedings of the 7th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM’2000), 2000, pp. 26-30. (174.pdf)
  • L. Proekt, S. Yuferev and N. Ida, “Calculation of the surface impedance near an imperfectly conducting edge,” in Proceedings of the Fifth International Conference o Mathematical and Numerical Aspects of Wave Propagation, 2000, pp. 241-245. (150.pdf)
  • N. Ida and S. Yuferev, “A generalized Surface Impedance Concept,”(Invited), Proceedings of the 9th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering and European TEAM Workshop, Sept. 2000 pp. 181-186. (149.pdf)
  • E. Silva and N. Ida, “A comparison of Absorbing Boundary Conditions (ABCs) to Perfectly Matched Layer (PML) in the 2D Frequency Domain Finite Element Method“, in Non-Linear Electromagnetic Systems, P.Di Barba and A. Savini, Eds., IOS Press, Amsterdam, 2000, pp. 389-392.
  • N. Ida, “The Remote Field Effect: Models and Interpretations,” in Nondestructive Characterization of Materials IX, Sydney, Australia, 1999, Robert E. Green, Ed., AIP Conference Proceedings 497, pp. 95-100.
  • M. Xu and N. Ida, “Solving Electromagnetic Inverse Problems by Artificial Intelligence Methods”, in Proceedings of the Third Brazilian Electromagnetics Conference (Anais do III Congresso Brazileirode Eletromagnetismo), Sao Paulo, October 25-28, pp. 206-209, Nov. 1998. (146.pdf)
  • Z. Ren and N. Ida,  “Computation of Magnetostatic Field using Second Order Edge Elements in 3D,” Proceedings of the 6th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering,21-23 September 1998, Graz, Austria, pp. 248-252. (145.df)
  • Z. Ren, N. Ida and A. Razek, “Some Benefits of Differential Forms in Electromagnetic Field and Force Calculation,” in Proceedings of the 4th International Workshop on Electric and Magnetic Fields: From Numerical Methods to Industrial Applications, Marseille, France, May 12-15, pp. 307-312, May 1998.
  • M. Xu and N. Ida, “Solution of Magnetic Inverse Problems using Artificial Neural Networks,” Proceedings of the 6th International Conference on Optimization of Electrical and Electronic Equipment, Vol I, pp. 67-70, May 1998. (ida-xu-14)
  • N. Ida, (keynote address) “Numerical models for electromagnetic nondestructive testing of materials,” in Proceedings of CORENDE (Congreso Regional de Ensayosno Destructivos y Estructurales), October 27 to 30, 1997, Mendoza, Argentina, pp. 1-9. (142.pdf)
  • G. Adamovsky and N. Ida, “Laser Beam Propagation Through Inhomogeneous Media,” Proceedings of the SPIE Conference on Optical Technology in Fluid, Thermal, and Combustion flows III, San Diego, 27 July- 1 August, 1997, pp. 530-539.
  • S. Yuferev and N. Ida, “Impedance Boundary Conditions of HighOrder Approximation for Electromagnetic Transient Scattering Problems,” Proceedings of the 10th International Conference on Antennas and Propagation, Edinburgh, April 12-17, 1997), IEE Publication No. 426, pp. 1,306-1,309, 1997.
  • J.P.A. Bastos, N. Ida, R.C. Mesquita and J. Gomes,”Use of reduced 3Dedge elements for 2D vector potential problems,” Record of the 9th COMPUMAG Conference on the Computation of Electromagnetic Fields, October, 1993, pp. 336-337.
  • J.P.A. Bastos, N. Ida and J. Gomes,” Modeling of 2D TE waveguides using reduced 3D hexahedral edge elements, Record of the 9th COMPUMAG Conference on the Computation of Electromagnetic Fields, October, 1993, pp. 338-339.
  • A.J. Sharafuddin, N. Ida and J. Grover, “Object oriented design and matrix computation,” Record of the 9th COMPUMAG Conference on the Computation of Electromagnetic Fields, October, 1993, pp. 234-235.
  • J.P.A. Bastos, N. Sadowski and N. Ida, “A new 2D formulation for magnetostatics using H as variable,” Proceedings of the ISTET ‘97 Conference,Palermo, Italy, June 9-11, 1997, pp. 236-239. (135.pdf)
  • Q.K. Zhang, N. Ida, Y.R. Qiu and Z.R. Jiang, “A new permanent magnet synchronous motor design configuration and finite element analysis,” Proceedings of the 12th Annual Review of Progress in AppliedC omputational Electromagnetics, Vol. II, 1996, pp. 1196-1201.
  • N. Ida and J.S. Wang, “Models for microwave nondestructive testing of materials,”Proceedings of the Seventh International Symposium on Nondestructive Characterization of Materials, Prague, Czech Republic, June19-22, 1995, A.L.Bartos, R.E. Greenand C.O. Ruud, Transtec Publications, Zurich, Switzerland, pp. 93-100.
  • N. Ida, “Testing and monitoring with microwave resonant structures: applications and models,” Proceedings of the 14th World Conference on Non-Destructive Testing, New Delhi, 8-13 December 1996, Ashgate Publishing Company, Vol. 1, pages 259 – 264. (181.pdf)
  • S.Yuferev and N.Ida “Application of approximate boundary conditions to electromagnetic transient scattering problems”, Proceedings of the 3rd International Conference on Computations in Electromagnetics (CEM), 10-12 April 1996, Bath UK, publ. by IEE, 1996, Conf. Publ. Number 420,  pp. 51-56. (QC759.6 .I56 1996). (ida-sergey-17)
  • K.C. Chellamuthu and N. Ida, (Invited) “Adaptive finite element mesh refinement and ‘a posteriori’ error estimation estimation procedures for electromagnetic field computation,” Proceedings of CBmag’95 – Brazilian Conference on Electromagnetics, May1995, pp. 25-30. (125.pdf)
  • K.C. Chellamuthu and N. Ida, “An a posteriori local error estimation scheme for adaptive computation of electromagnetic fields using edge finite elements,” in Advanced Computational and Design Techniques in Applied Electromagnetic Systems, S.Y. Hahn, ed., Elsevier, 1995, pp. 587-590.
  • J.P. Gomes and N. Ida, “3D analysis of waveguide loaded cavities using edge based finite elements,” in Advanced Computational and Design Techniques in Applied Electromagnetic Systems, S.Y. Hahn, ed.,Elsevier, 1995, pp. 559-562.
  • K.C. Chellamuthu and N. Ida, “Parallel processing in adaptive finite element computation of electromagnetic field problems,” In Proceedings ofthe International conference on Robotics, Vision and Parallel Processing for Industrial Automation, ROVPIA-94, Ipoh, Malaysia, May 1994, pp. 519-527.
  • J.P. Gomes N. Ida, and J.S. Wang, “Some Computational Techniques for Modeling of Testing Parameters in Microwave Cavity Resonators,” Proceedings of the SPIE Conference, 25-26 July, 1994, San Diego, CA., Volume 2275, S.S.Udpa and H.C. Han eds., pp. 72-78. (183.pdf)
  • N. Ida and J.S. Wang, “Vector boundary element/finite element method for electromagnetic scattering,” Simulation and Design of Applied Electromagnetic Systems, T. Honma, Ed. Elsevier Science B.V., 1994, pp. 41-44.
  • N. Ida, “Microwave Nondestructive Evaluation of Materials: a Review,” in Review of Progress in Nondestructive Evaluation, Vol. 15a, D.O. Thompson and D.E. Chimenti, Plenum Press, New York, 1994, pp. 591-598. (108.pdf)
  • N. Ida, M. Li, and L. Roemer, “Bayesian analysis in manufacturing instrumentationfor test and evaluation,” Proceedings ofthe 45th Annual Technical Conference on the Rubber and Plastic Industries, Akron, Ohio, April 27-28, 1993, pp.4-13. (ida-roemer-23)
  • N. Ida, Minyan Li, and L. Roemer, “Bayesian Analysis for Fault Location Based on Finite Element Models,” in Maximum Entropy and Bayesian Methods, A. Mohammad-Djafari and G. Demoments, (eds.), Kluwer Academic Publishers, Amsterdam, 1993, pp. 333-339. (paper32-x.pdf)
  • N. Ida, “Numerical models for electromagnetic nondestructive testing of materials, “(Invited paper), Proceedings of Congresso Brasiliero do Electromagnetismo Applicado, Belo Horizonte, Brazil, June 22-24, 1992, Vol.2, pp. 1-26. (107.pdf)
  • N. Ida, “Finite element and finite element/boundary element modeling for microwave nondestructive testing,” Proceedings of the Ninth International Conference of the Israel Society of Quality Assurance, Jerusalem, Israel, Nov.12-14, 1992, p. 716.
  • N. Ida, “Electromagnetic field modeling for nondestructive testing of composite materials“, in Electromagnetic Forces and Applications, J. Taniand T. Takagi, Eds., Elsevier, Amsterdam, 1992, pp. 187-190.
  • N. Ida, “3D eddy current computation”, Proceedings of the 13th IMACS’91World Congress on Computation and Applied Mathematics, Dublin, Ireland, July22-26, 1990, pp. 1628-1629. (90.pdf)
  • L.E. Roemer and N. Ida, “Steel characterization using Bayesian analysis of Barkhausen noise“, in Maximum Entropy and Bayesian Methods, W.T.Grandy, Jr. and L.H. Schick, eds., Kluwer Academic Publishers, 1991, 147-152.
  • N. Ida and B. Xu, “An analytic approach to characterization of the remote fieldeffect”, in Review of Progress in Quantitative Nondestructive Evaluation,D.O. Thompson and D. E. Chimenti, Eds., Vol. 10A, Plenum Press, New York 1991,pp. 309-316. (paper41-x.pdf)
  • J.S. Wang and N. Ida, “A numerical model for characterization of specimens in a microwave cavity“, in Review of Progress in Quantitative Nondestructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Vol.  10A, Plenum Press,New York 1991, pp. 567-574.
  • J.S. Wang and N. Ida, “An Edge Element Solution of Electromagnetic Transmission Through Apertures in Inhomogeneously Loaded Cavities“, Digest of the 1991AP-S Symposium,June 24-28, 1991, pp. 906-909.
  • J.S. Wang and N. Ida, “A 3-D FEM-BEM model for electromagnetic waves interaction with materials”, in Review of Progress in Quantitative Nondestructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Plenum Press, New York,1990, Vol. 9A, pp. 311-318. (72.pdf)
  • M.E. Lee and N. Ida, “A Transient Axisymmetric Formulation for Modeling of Composite Materials”, in Review of Progress in Quantitative Nondestructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Plenum Press, New York,1990, Vol. 9A, pp. 295-302.
  • J. Yao, L. Roemer N. Ida and K.S. Huo, “Delay estimation using maximum entropy derived phase information,” in Maximum Entropy and Bayesian Methods,P.F. Fougere, Ed., Kluwer Academic Publishers, The Netherlands, 1990, pp.309-324.
  • N. Ida, “Computation of resonant frequencies for non-uniformly loaded cavities using a modified 3D eddy current formulation”, in Proceedings of the European TEAM Workshop and International Seminar on Electromagnetic Field Analysis, Y. Krutzen, N.J. Diserens, C.R.I. Emson and D. Rodger, (eds.), 1990, pp. 267-274.
  • P. Subramaniam and N. Ida, “A parallel algorithm for finite element computation“, in Proceedings of the 2nd Symposium on the Frontiers of Massively Parallel Computation, (October 10-12, 1988, Fairfax, VA), IEEE Computer SocietyPress, (CH2649-2), Washington DC, 1989, pp. 219-222.
  • J.S. Wang and N. Ida, “Parallel algorithms for direct solution of large systemsof equations“, in Proceedings of the 2nd Symposium on the Frontiers of Massively Parallel Computation, (October 10-12,1988, Fairfax, VA), IEEE Computer SocietyPress, (CH2649-2), Washington DC,1989, pp. 231-234.
  • N. Ida, “Computation of fields in electromagnetic nondestructive testing”,in Finite Element Analysis in Fluids, (Proceedings of the Seventh International Conference on Finite Element Methods in Flow Problems, Huntsville, Alabama,April 3-7, 1989.) T. J. Chung and G. R. Karr, Eds., UAH Press, 1989, pp.487-492.
  • J.S. Wang, N. Ida and S. I. Hariharan, “Numerical modeling of transient wave propagation for high frequency NDT”,  in Review of Progress in Quantitative Nondestructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Plenum Press, New York, 1989, Vol. 8A, pp. 259-266.
  • N. Ida, “The remote field effect and its interpretation“, Review of Progress in Quantitative Nondestructive Evaluation, D. O. Thompson and D.E. Chimenti, Eds., Plenum Press, New York, 1989, Vol. 8A, pp. 275-281 .
  • N. Ida, “Theoretical aspects of the remote field effect”, Proceedings of the 3rd National Seminar on Non-Destructive Evaluation of Ferromagnetic Materials, Houston, Tx., March 1988, pp. 53-57.
  • N. Ida, “3-D shielding effects for MRI magnets”,  in Electromagnetic Fields in Electrical Engineering, D. Shunnian, Ed., International Academic Publishers, Oxford, Proceedings of the Beijing International Symposium on on Electromagnetic Fields in Electrical Engineering, Beijing, China, October 19-21, 1988, pp. 668-671. (59.pdf)
  • N. Ida, S. I. Hariharan, J. S. Wang and  M. E.Lee, “Computation of high frequency electromagnetic fields”, in Electromagnetic Fields in Electrical Engineering, D. Shunnian, Ed., International Academic Publishers, Oxford,Proceedings of the Beijing International Symposium on Electromagnetic Fields in Electrical Engineering, Beijing, China, October19-21,1988, pp. 600-603.(58.pdf)
  • M. J. Braun, N. Ida, C. Batur, B. Rose, R. C. Hendricks and R. L.Mullen “A Non-Invasive Laser Based Method for Flow Visualization and Evaluation in Bearings”,In Tribology- Friction, Lubrication and Wear,Proceedings of the International Conferenceon Tribology, Friction, LubricationandWear,July 1-3, 1987, London(UK),Vol. 1, 1987, pp. 37-46.
  • M. V. Koroly, N. Ida and L. E. Roemer, “An electromagnetic actuator using recently developed Rare Earth Permanent Magnets”, presented at the VI World Congress of the International Society for Artificial Organs, Munich, Germany,September 6-9, 1987.
  • N. Ida and L.E. Roemer, “The use of eddy current testing in rubber belting evaluation”, in IEEE Conference Record of the 39th Annual Conference on Electrical Engineering Problems in the Rubber and Plastics Industries, Akron, Ohio, April6-7, 1987,pp. 9-13.
  • N. Ida and L.E. Roemer, “Eddy Current Detection and Evaluationof Steel Wires,” presented at the 1987 ASNT Fall Conference, Atlanta, GA.,October 7-9, 1987. (No Proceedings).
  • N. Ida, “Three Dimensional Eddy Current Modeling,” Review of Progress in Quantitative Nondestructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Plenum Press, New York, Nov. 1987, Vol. 6A, pp.201-209.
  • M. J. Braun, C. Batur, N, Ida, B. Rose, R. C. Hendricks and R. L.Mullen,”A Non-Invasive, Laser Based Flow Analysis for Thin Film Flows at Low Reynolds Numbers,”Proceedings of the ASME/JSME Heat Transfer Conference, Hawaii, March 1987, Vol. 2, 1987, pp. 71-78.
  • N. Ida and R. Ludwig, “Performance of large scale finite element eddy current and ultrasonic models on a vector computer,”in Review of Progress in Quantitative Non destructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Vol. 5A, Plenum Press, N. Y., 1986, pp. 157-164.
  • N. Ida, “Velocity effects  in eddy current problems”, in Proceedings of the Fourth Eddy Current Seminar, Rutherford Appleton Laboratory, RAL-86-088,March 24-26, 1986, pp. 189-202.
  • N. Ida, “Some special aspects and limitations of 3-D finite element modeling,” Proceedings of the Second National Seminar in Non-Destructive Evaluation of Ferromagnetic Materials, Houston, Tx., March 19-20, 1986.
  • N. Ida, “A mesh generator with automatic bandwidth reduction for 2-Dand 3-D geometries,” In Computational Electromagnetics, Z. Cendes, Ed., Elsevier Science Publishers, 1986, pp. 13-22. (17.pdf)
  • N. Ida, “An integrated electromagnetic finite element package for personal computers,” Proceedings of the Second National Seminar in Non-Destructive Evaluationof Ferromagnetic Materials, Houston,Tx., March19-20, 1986.
  • C. Shaver and N. Ida, “A PC based pre-processor for finite element analysis,”in Proceedings of the 17th Pittsburgh Conference on Modeling and Simulation, Pittsburgh,April 24-25, 1986, Vol. 17, Part 3, pp. 927-931.
  • N. Ida, “Modeling of Velocity Effects for Low Frequency Eddy Current Testing,” Proceedings of the Second National Seminar on Non-Destructive Evaluation of Ferromagnetic Materials, Houston, Tx. March 19-20, 1986. (25.pdf)
  • N. Ida and K. Udawatta, “Solution of Linear Systems of Equations on the Massively Parallel Processor,” Proceedings of the First Symposium on the Frontiers of Massively Parallel Scientific Computation,NASA/Goddard Space Flight Center,September 24-25, NASA CP-2478, 1986, pp.249-253. (ida-udawatta.pdf)
  • N. Ida, “Development of a 3-D eddy current model for nondestructive testing phenomena,” in Review of Progress in Quantitative Non destructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Plenum Press, New York,1984, Vol. 3A, pp. 547-555.
  • H. Hoshikawa and R. M. Li and N. Ida, “Finite element analysis of eddy current surface probes,” in Review of Progress in Quantitative Non destructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., Plenum Press, New York,1984, Vol. 3A, pp. 675-682.
  • N. Ida, “Factors in three-dimensional modeling of leakage fields,”Proceedings of the First National Seminar on Nondestructive Inspection of Ferromagnetic Materials, Houston, Texas, March 28-29, 1984. (13.pdf)
  • N. Ida, “Vector computing in 3-D eddy current calculations,”Proceedings of the Third Eddy Current Seminar, Rutherford Appleton Laboratory, Abingdon,United Kingdom, April 2-4, 1984, pp. 41-56.
  • S. Heath, N. Ida, S. R. Satish and L. Srinivasan, “Residual and active magnetic field modeling,” Presented at the QualTest-2 Conference, October25-27, 1983, Dallas, Texas. (Abstract in Materials Evaluation, Sept. 1983,p. p/25). (010.pdf)
  • W. Lord and N. Ida, “Developments in the numerical modeling of steam generator EC NDT phenomena,” NDE in the Nuclear Industry, H. Wadley, Ed., ASM,Metals Park, Oh., 1984, pp. The 6th International ASM Conference of Quantitative Nondestructive Evaluation in the Nuclear Industry, 28 Nov.-2 Dec., 1983, Zurich, Switzerland, pp. 489-493.
  • R. Palanisamy, N. Ida and W. Lord, “Developments in the finite element modeling of eddy current NDT phenomena at Colorado State University,” in Review of Progress in Quantitative Non destructive Evaluation, D. O. Thompson and D.E. Chimenti, Eds., Plenum Press, New York, 1982, Vol. 1, pp. 357-361.
  • N. Ida and W. Lord, “GIGO – A study of mesh structure for eddy current problems,” proceedings of the 5th  COMPUMAGConference, June 3-6, 1985, pp 495-498. (012.pdf)